XPSWMM Conversion TUFLOW Geometry Control File (TGC)

From Tuflow
Revision as of 14:16, 22 February 2024 by Emilie Nielsen (talk | contribs)
Jump to navigation Jump to search

TUFLOW Geometry Control File (TGC)

The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:

  • Information on the size and orientation of the grid;
  • Grid cell codes (whether cells are active or inactive);
  • Bed / ground elevations; and
  • Bed material type or flow resistance value.

The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.


Up
Go-up.png Continue to Next Step: "TUFLOW Control File (TCF)"
Up
Go-up.png Back to Main XPSWMM to TUFLOW Conversion Page