TUFLOW SWMM Tutorial M02 Results QGIS Development

From Tuflow
Jump to navigation Jump to search

QGIS Result Viewing

  1. Open TUFLOW Viewer from the TUFLOW Plugin toolbar.

    Tuflow plugin tuflow viewer.png

  2. Open the simulation results: Select File > Load Results. Navigate to the TUFLOW\runs folder and select TS02_5m_001.tcf.
  3. When asked 'Do you want to open result GIS Layer?', select 'Yes'. Five new files will load to the QGIS Layers Panel:
    • TS02_5m_001_swmm_ts_P: 1D SWMM node junction and outlet water level results
    • TS02_5m_001_swmm_ts_L: 1D SWMM conduit flow results
    • TS02_5m_001_PLOT_P: 1D ESTRY and 2D plot output water level and velocity results (Note: There are no ESTRY results from this simulation)
    • TS02_5m_001_PLOT_L: 1D ESTRY and 2D plot output flow results (Note: There are no ESTRY results from this simulation)
    • TS02_5m_001: 2D TUFLOW results


Pipe Flow Results

  1. In the QGIS Layers Panel, right click TS02_5m_001_swmm_ts_L and select 'Zoom to Layer(s)'.
  2. In the TUFLOW Viewer Panel, click 'Play Through Timesteps' Play through timesteps icon.png. Observe how the TS02_5m_001_swmm_ts_L results change color depending on the amount of flow within the 1D pipes.


  3. In the QGIS Layers Panel, select (left click) TS02_5m_001_swmm_ts_L.
  4. Use the 'Select Features' tool to highlight a pipe within the network.
  5. Click on the 'Flow' dataset under 'Result Type' in the TUFLOW Viewer 'Time Series' list.
  6. Use the 'Select Features' tool to highlight other pipes within the network (hold Shift to select multiple).


  7. In the QGIS Layers Panel, select (left click) TS02_5m_001_swmm_ts_P.
  8. Use the 'Select Features' tool to highlight a node junction within the network.
  9. Click on the 'Water Level' dataset under 'Result Type' in the TUFLOW Viewer 'Time Series' list.
  10. Use the 'Select Features' tool to highlight other node junctions within the network (hold Shift to select multiple).


Pipe Long-section Results

  1. In the QGIS Layers Panel, select (left click) TS02_5m_001_swmm_ts_L.
  2. Use the 'Select Features' tool to highlight two pipe segments. The long-section between the pipes will be plotted.
  3. Click on the 'Cross Section / Long Profile' tab.
  4. Click on the 'Water level', 'Max Water Level' and 'Culverts and Pipes' datasets under 'Result Type' in the TUFLOW Viewer 'Time Series' list.
  5. Move the time slider to view how the water level in the pipe varies during the simulation.



Up
Go-up.png Back to TUFLOW SWMM Tutorial 2