TUFLOW Message 1036

TUFLOW Message
WARNING 1036 - Maybe problems with interpolating n values for channel ",a,". Interpolating n using channel n and downstream XSL n. Check n values. U/S X-Sect n = 'a'; D/S X-Sect n = 'b'; n interpolated = 'c'.

Alternate Message
NA

Message Type
WARNING

Description
Channel's n was interpolated using channel n and downstream XSL n.

Suggestions
Check final n values if they are correct, specifically if some n values were not specified as this can result in non-standard n values.

Up
1xxx Messages