TUFLOW Message 2028

From Tuflow
Jump to navigation Jump to search

TUFLOW Message
ERROR 2028 - Could not find a CN object or 1D node snapped to 2D SX object.

Alternate Message
NA

Message Type
ERROR

Description
Could not find a CN object or 1D node snapped to 2D SX object.

Suggestions
Check snapping and boundary configuration. 2D SX object should be snapped to 1D node or linked to a 1D node by CN line (connection object).

When the SX object is a region, the SX region object and the CN line object must be in the same READ GIS BC command.

SHP example:

Read GIS BC == 2d_bc_M03_culverts_R.shp | 2d_bc_M03_culverts_L.shp ! SX and CN object in the same command via |

GPKG example:

Read GIS BC == 2d_bc_M03_culverts_R | 2d_bc_M03_culverts_L ! SX and CN object in the same command via |

MIF example:

Read GIS BC == 2d_bc_M03_culverts_SX_CN.mif ! SX and CN object in the same file


Up
Go-up.png 2xxx Messages