TUFLOW Message 2231

From Tuflow
Jump to navigation Jump to search

TUFLOW Message
CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts.

Alternate Message

Message Type

When using Read GIS Z HX Line points with type ZP are snapped along the HX line to set the elevation of the 2D cells along 1D/2D connection. For the ZP points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a HX line has been found without any attached ZP points. This line is not modifying any cell elevations.

Check HX line to see if a breakline is intended.

Go-up.png 2xxx Messages