TUFLOW Message 2805

TUFLOW Message
ERROR 2805 - Map Output Corner Interpolation must be Method C for Quadtree.

Alternate Message
NA

Message Type
ERROR

Description
TUFLOW is being run using Quadtree solver with the legacy command "Map Output Corner Interpolation == Method A or Method B" or using Defaults == Pre 2013 (or earlier). These options pre-date the Quadtree solver and are not supported in the Quadtree solver. Refer to the TUFLOW Manual for details of these commands.

Suggestions
Please remove the unsupported commands or switch from Quadtree solver to TUFLOW Classic.

Up
2xxx Messages