TUFLOW Message 2810

TUFLOW Message
CHECK 2810 - No "Base Cell Size" command specified in .qcf using cell size in .tgc.

Alternate Message
CHECK 2810 - No "Orientation Angle" command specified in .qcf using angle in .tgc.

Message Type
CHECK

Description
The Quadtree Control File (QCF) command Base Cell Size == and/or the QCF command Orientation Angle == were not implemented, so the cell size and/or the orientation angle will default to the values assigned in the TGC.

Suggestions
If required, include the Base Cell Size == and/or the Orientation Angle == command in the QCF.
Refer to the TUFLOW Manual for more information on the available QCF commands.

Up
2xxx Messages