TUFLOW Message 3514

TUFLOW Message
ERROR 3514 - Unrecognised SGS MAX/MIN Approach.

Alternate Message
ERROR 3514 - Unrecognised SGS Depth Output option.
ERROR 3514 - Unrecognised SGS Depth Interpolation Approach.

Message Type
ERROR

Description
An unrecognised approach/option was defined for one of the following TUFLOW Control file (.tcf) commands:

SGS Zpt MAX/MIN Approach ==

SGS Depth Output ==

SGS Depth Interpolation Approach ==

Note: As of the 2023-03 TUFLOW Release, SGS Zpt MAX/MIN Approach and SGS Depth Interpolation Approach are legacy commands.

Suggestions
Review the command documentation to ensure a valid approach/option has been specified. Refer to the TUFLOW Manual for the latest command documentation.

Up
3xxx Messages