Tute M05 ArcQGIS 2d zsh Archive

Introduction

In this page we describe the GIS modifications required for tutorial module 5 using ArcGIS or QGIS.

Method

1. From the model\gis\empty\ folder copy the 2d_zsh_empty_R.shp into the model\gis\ folder named as 2d_zsh_M05_development_001_R.
2. Add this layer to the map window and make this the editable layer.
3. Open the Fill_Area and Cut_Area layers provided in the Module_Data\Module_05\.
4. Copy the polygon from the Fill_Area table and paste this into the gis\2d_zsh_M05_development_001_R layer.
5. Set the following attributes:
   

   Attribute	Value
   Z	50
   dz	0
   Shape_Width	0
   Shape_Options	MAX NO MERGE

   The attributes are described completely in the TUFLOW Manual. However, in brief we are setting the elevation to 50 m (Z = 50), where the elevation of 50 m is above the current surface elevation ("MAX") and the "NO MERGE" option indicates that we do not want to merge the elevations at the perimeter of the polygon. Essentially, within the fill polygon we are stamping the elevation of 50 m into the model where the elevation is currently less than 50 m.
6. Copy the polygon from the Cut_Area table and paste this into the gis\2d_zsh_M05_development_001_R layer.
7. Set the following attributes:
   

   Attribute	Value
   Z	-1
   dz	0
   Shape_Width	0
   Shape_Options	ADD NO MERGE

   For this polygon we are adding -1 to all elevations within the polygon, i.e. within the polygon we are subtracting 1 m from all the elevations.
8. Save the table and export the 2d_zsh layer so that it is ready for use in TUFLOW.

Conclusion

The GIS dataset has been created. The next step is to modify the control files. Please return to the module 5 page.