Tutorial M08 Results QGIS update V2 draft

From Tuflow
Jump to navigation Jump to search

Introduction

QGIS is used to load and view the 10m, 5m and 2.5m scenarios with the TUFLOW Viewer 2. For viewing of the 2D map results, see Module 1.

Method

Inspect the results from each scenario:

  1. Open the Map Outputs and Time Series results, either:
    • Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or
    • Module_08\TUFLOW\results\M08_10m_001.xmdf > loads the map output for the 10m mesh results
    • Module_08\TUFLOW\results\M08_5m_001.xmdf > loads the map output for the 5m mesh results
    • Module_08\TUFLOW\results\M08_2.5m_001.xmdf > loads the map output for the 2.5m mesh results
    • Module_08\TUFLOW\results\plot\M08_5m_001.tpc > loads the time series output results
    • In File Explorer, navigate to the files above and drag and drop them into the QGIS workspace.
  2. Inspect the resolution of the results at the edges of the floodplain, the resolution is finer for the 2.5m simulation:



  3. Inspect the timeseries of the flow at the plot output line:




Conclusion

  • The results of the 10m, 5m and 2.5m scenarios were inspected using the TUFLOW Viewer 2.
  • For further functionality, see TUFLOW Viewer 2 documentation.


Up
Back to Module 8 Main Page
Retrieved from "https://wiki.tuflow.com/w/index.php?title=Tutorial_M08_Results_QGIS_update_V2_draft&oldid=46108"