View source for Tutorial M11 002 Check Files QGIS GPKG

= Introduction =
QGIS is used to import the check files and review the model.<br>
<br>

= Method = 
This tutorial introduces:
:*[[Check_Files_2d_grd | _grd_check_R]]
:*[[Check_Files_1d_to_2d_bc | _1d_to_2d_check_R]]
:*[[Check_Files_1d_nwk_C | _nwk_C_check_L]]

Review the check files: <br>
<ol>
<li>Open the files, either:
:*Within the QGIS Browser Panel, navigate to '''Module_11\TUFLOW\check\M11_5m_002_Check.gpkg''' and double click the following layers, or 
::*'''M11_5m_002_grd_check_R'''
::*'''M11_5m_002_1d_to_2d_check_R'''
::*'''M11_5m_002_nwk_C_check_L'''
:*In File Explorer, navigate to the '''Module_11\TUFLOW\check''' folder, drag and drop the '''M11_5m_002_Check.gpkg''' into the QGIS workspace and select the layers above (hold Ctrl to select multiple).
<li>Use the 'Apply TUFLOW Styles to Open Layers'.
<li>Use the 'Apply GPKG Layer Names'.
<li>The 2d_grd_check file shows all active cells and confirms the 1D open channel is removed from the 2D domain including the 1D weir area at the downstream road.
<li>The 1d_to_2d_check file contains the cells that transfer the water between the 1D and 2D domain: <br>
<br>
{{Video|name=Animation_M11_002_Check_01a.mp4|width=1238}}<br>
<br>
<li>The nwk_C_check file contains information on the 1D channels, bridges and weirs. Use the 'Identify Features' tool to inspect the attributes:<br>
<br>
{{Video|name=Animation_M11_GPKG_002_Check_02.mp4|width=1238}}<br>
</ol>
<br>

= Conclusion = 
:*The code layer was inspected to confirm the 1D weir location was deactivated from the 2D simulations. 
:*The cells connecting the 1D and 2D were reviewed. 
:*The 1D network layer was inspected, properties of the downstream bridge and weir reviewed.
<br>
{{Tips Navigation
|uplink=[[Tutorial_M11#Check_Files_2| Back to Module 11 Main Page]]
}}