View source for Tute SAGA M01 Create Projection

<ol>
=Introduction=
This page describes the process of creating a new "Shapes" layer in SAGA.  We will define the projection of this table and this will be used to set the GIS coordinate system (projection) of the TUFLOW model.
=Method=
<li>Using the menus navigate to ''Modules >> Shapes >> Construction >> Create New Shapes Layer''.</li>
[[File:Tute M01 Saga New Shape.png|frame|none|Create a new Shapes Layer]]
<li>Under the ''Name'' field set this to '''Projection'''. Leave the remaining options as the defaults.</li>
[[File:Tute M01 Saga New Shape2.png|frame|none|New Shapes Layer Dialogue]]
A new shape layer called projection should have been created, this should be visible in the Data tab of the workspace.
[[File:Tute M01 Saga Projection1.png|frame|none|Newly Created Projection Shape Layer]]
The next step is to define the projection of this shapes file.
<li>In the menus select ''Modules >> Projection >> Set Coordinate Reference System''.</li>
<li>here</li>