View source for 1D Pumps

<font size = 18>Page Under Construction</font>
<br>
<br>
<br>
=Introduction=
If the <font color="blue"><tt>Write Check Files </tt></font> <font color="red"><tt>==</tt></font> command is included in the .tcf (2D check files) and/or .ecf (1D check files)  will be output from TUFLOW.  These are a series of output files in both GIS (MapInfo or Shapefile format) and tabular data in .csv format.  These check files contain information on the data processed by TUFLOW, for example the _zpt_check file contains the final elevation at each zpt in the model.
=Managing Check Files=
The 2D and 1D check files can be controlled separately by having the <font color="blue"><tt>Write Check Files </tt></font> <font color="red"><tt>==</tt></font> in both the .tcf and .ecf files.  However, 
<font color="blue"><tt>Write Check Files </tt></font> <font color="red"><tt>==</tt></font> in the .tcf file will automatically also write the 1D check files.  There is no need to specify <font color="blue"><tt>Write Check Files </tt></font> <font color="red"><tt>==</tt></font> in the .ecf file unless a different folder path for the files is desired.<br>
The check files for big models can get very large and consume quite a lot of hard drive space.  It is possible to exclude or include certain check file types.  This is done by specifying either "Include" or "Exclude" to the left of the equals sign:<br>
<font color="blue"><tt>Write Check Files Exclude </tt></font> <font color="red"><tt>==</tt></font><tt> <file list></tt><br>
<font color="blue"><tt>Write Check Files Include </tt></font> <font color="red"><tt>==</tt></font><tt> <file list></tt><br>
The file list is a space separated list of files.  To exclude the large grd, uvpt and zpt files specify:<br>
<font color="blue"><tt>Write Check Files Exclude </tt></font> <font color="red"><tt>==</tt></font><tt> zpt uvpt grd</tt><br>
To output only the gridded elevations (DEM_Z) the command would be :<br>
<font color="blue"><tt>Write Check Files Include </tt></font> <font color="red"><tt>==</tt></font><tt> DEM_Z</tt><br>
=Tips for Visualising Check Files=
Depending on the size of the model, the check files may contain a large amount of data, for example the _grd_check file may contain thousands or millions of cells.  As a modeller you probably won't inspect each cell to ensure that the data is value, however you may want to view this for the entire model.  Thematic mapping or styling the input layers can be used in your GIS software to do this.
Some tips are given below for a range of GIS platforms, however, the functionality is likely to be available in almost all GIS platforms:<br>