Difference between revisions of "TUFLOW Message 3519"
(6 intermediate revisions by 4 users not shown) | |||
Line 2: | Line 2: | ||
|tuflow_message=CHECK 3519: Using MIN or GULLY option in SGS model. | |tuflow_message=CHECK 3519: Using MIN or GULLY option in SGS model. | ||
|alt_msg=NA | |alt_msg=NA | ||
− | |type=[[CHECK]] | + | |type=[[CHECK]] |
− | |message_desc=If the DEM's resolution is fine enough, SGS can preserve the | + | |message_desc=If the DEM's resolution is fine enough, SGS can preserve the flow path along the cells/faces without using any gully line. By default, a gully line applies a gradient along the faces based on the cell corners and |
+ | cell side Zpt values, and creates sloping cells using the ZC, ZU, ZV and ZH values. It does insure a continuous flow path, but the spatial accuracy may become lower comparing to the approach of sampling elevation directly from DEM. For more discussion, please see <u>[[Quadtree_and_Sub-Grid_Sampling_FAQ#Why_shouldn.27t_I_use_Z_Shape_gully.2Fmin_lines_with_SGS_models.3F|SGS FAQ page]]</u>. | ||
|suggestions=Check if "SGS Sample Distance" and resolution of the DEM is fine enough to capture the gully line. If so, the topography modification MIN or GULLY option can be removed. | |suggestions=Check if "SGS Sample Distance" and resolution of the DEM is fine enough to capture the gully line. If so, the topography modification MIN or GULLY option can be removed. | ||
− | + | ||
− | |||
− | |||
− | |||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
− | |||
}} | }} |
Latest revision as of 10:26, 3 March 2023
TUFLOW Message
CHECK 3519: Using MIN or GULLY option in SGS model.
Alternate Message
NA
Message Type
CHECK
Description
If the DEM's resolution is fine enough, SGS can preserve the flow path along the cells/faces without using any gully line. By default, a gully line applies a gradient along the faces based on the cell corners and
cell side Zpt values, and creates sloping cells using the ZC, ZU, ZV and ZH values. It does insure a continuous flow path, but the spatial accuracy may become lower comparing to the approach of sampling elevation directly from DEM. For more discussion, please see SGS FAQ page.
Suggestions
Check if "SGS Sample Distance" and resolution of the DEM is fine enough to capture the gully line. If so, the topography modification MIN or GULLY option can be removed.
Up |
---|
3xxx Messages |