Difference between revisions of "TUFLOW Message 2575"
Line 5: | Line 5: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=Error occurred while reading the specified tif file. | |message_desc=Error occurred while reading the specified tif file. | ||
− | |suggestions=Check the file is in GeoTIFF format and/or the projection is specified. | + | |suggestions=Check the file is in GeoTIFF format and/or the projection is specified.<br> |
+ | |||
+ | GeoTIFF may be in tile format, which is currently not supported. <br> | ||
+ | The TIF format supports storing data in both a tiled and strip structure. The 2023-03-AA release only supports the strip structure as this is the most common and the default out of QGIS/GDAL. It is planned that the next major release after 2023-03 will support the tile structure as well.<br> | ||
+ | [[File: tif_strip_tile_structure.PNG]]<br> | ||
+ | To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format. | ||
+ | * Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure) | ||
+ | * Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure | ||
+ | * Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly: | ||
+ | : <u>[[Raster_Format_Conversion_Using_gdal_translate#Cloud_Optimised_GeoTIFFs | Converting from Cloud Optimised GeoTIFFs]]</u> | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
}} | }} |
Latest revision as of 16:16, 4 August 2023
TUFLOW Message
ERROR 2575 - file is not a GeoTIFF - <>.
Alternate Message
ERROR 2575 - extracting projection from "<>".
Message Type
ERROR
Description
Error occurred while reading the specified tif file.
Suggestions
Check the file is in GeoTIFF format and/or the projection is specified.
GeoTIFF may be in tile format, which is currently not supported.
The TIF format supports storing data in both a tiled and strip structure. The 2023-03-AA release only supports the strip structure as this is the most common and the default out of QGIS/GDAL. It is planned that the next major release after 2023-03 will support the tile structure as well.
To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.
- Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
- Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure
- Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
Up |
---|
2xxx Messages |