QGIS SWMM Conduits Assign Losses: Difference between revisions

This tool createsgenerates loss geometry and attributes for a SWMM conduit layer. Losses are dependent uponon whether a conduit is the furthest upstream, furthest downstream, and which nodes are connected to inlets. Upstream entrance losses are assigned to the furthest upstream channels where the upstream node is <u>not</u> connected to an inlet, and other entrance losses are assigned to all other conduits (may be 0.0). Downstream exit losses are assigned to the furthest downstream channels where the downstream node is <u>not</u> connected to an inlet, and other exit losses are assigned to the rest of the channels (may be 0.0). This tool creates entrance and exit losses specified by the user throughout the domain. Channels that experience atypical size changes may need higher or lower loss coefficients.

'''Note:''' This tool relies on the "From Node" and "To Node" fields to determine the position in the network. The <u>[[QGIS SWMM Conduits Assign Node Fields|Conduits - Assign node fields]]</u> processing tool will ensure the "From Node" and "To Node" fields are correctly assigned.

This tool populates the 'losses_Kentry', losses_Kexit', and 'losses_Kavg' fields of the input conduit layer. The 'losses_Kentry' and losses_Kexit' fields are determined by the input parameters below. The 'losses_Kavg' field is set to 0.0,; however if the field is already populated, the tool will not override the existing value.

<li>'''Input layer:''' The existing conduits layer thatto will be assignedwhich the losses fields will be assigned.

<li>'''Selected features only:''' If channel(s) in the conduits layer have been selected using the 'Select Features' tool, this option will become available. If this is checked on, the tool will only assign losses fields forto the channelsselected that have been selectedchannel(s).

:*Entrance Loss: The data to populate the 'losses_Kentry' field for the furthest upstream conduits' features. Default value is 0.5.

:*Exit loss: The data to populate the 'losses_Kexit' field for the furthest downstream conduits' features. Default value is 1.0.

:*Entrance loss: The data to populate the 'losses_Kentry' field for the other upstream conduits' features. Default value is 0.2.

:*Exit loss: The data to populate the 'losses_Kexit' field for the other downstream conduits' features. Default value is 0.4.

'''Note:''' If 'Edit Feature In-Place' is selected, the tool does not require the 'Input layer' or the 'Conduits' parameters, as the tool will override the existing conduits file with the updated attributes.

{{Video|name=Animation_Conduits_Assign_Losses_01bAnimation_Conduits_Assign_Losses_01d.mp4|width=12351236}}

Using the 'Edit Feature In-Place' Tooltool:

{{Video|name=Animation_Conduits_Assign_Losses_02bAnimation_Conduits_Assign_Losses_02d.mp4|width=12351236}}