QGIS SWMM Junctions Downstream Junctions to Outfalls: Difference between revisions

From Tuflow
Jump to navigation Jump to search
Browse history interactively
← Older edit
Content deleted Content added
VisualWikitext
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Introduction ==
== Introduction ==
This tool converts junctions on the downstream side of a network to outfall nodes as required by SWMM. An outfall layer with the converted nodes will be created along with a modified junction layer (outfall nodes removed). The contents of these layers needs to be copied into the appropriate layers in the SWMM GeoPackage.<br>
This tool converts junctions on the downstream side of a network to outfall nodes as required by SWMM. An outfall layer with the converted nodes will be created along with a modified junction layer (outfall nodes removed). The contents of these layers need to be copied into the appropriate layers in the SWMM GeoPackage.<br>

'''Note:''' This tool relies on the 'From Node' and 'To Node' fields to determine position in the network. The <u>[[QGIS SWMM Conduits Assign Node Fields|Conduits - Assign node fields]]</u> processing tool will ensure the 'From Node' and 'To Node' fields are correctly assigned.
'''Note:''' This tool relies on the 'From Node' and 'To Node' fields to determine position in the network. The <u>[[QGIS SWMM Conduits Assign Node Fields|Conduits - Assign node fields]]</u> processing tool will ensure the 'From Node' and 'To Node' fields are correctly assigned.
<br>
<br>
Line 12: Line 13:
=== Parameters ===
=== Parameters ===
<ol>
<ol>
<li>'''Input junctions:''' The existing junctions layer to be converted.
<li>'''Input junctions:''' The existing junctions layer.
<li>'''Selected features only:''' If nodes(s) in the junctions layer have been selected using the 'Select Features' tool, this option will become available. If this is checked on, the tool will only convert the nodes that have been selected.
<li>'''Selected features only:''' If node(s) in the junctions layer have been selected using the 'Select Features' tool, this option will become available. If checked on, the tool will only check the selected node(s).
<li>'''Input conduits:''' The conduits layer to which the junctions and outfalls are connected.
<li>'''Input conduits:''' The conduits layer containing the channel(s) to which the junction and outfall node(s) are connected.
<li>'''Modified junctions layer:''' Determines the location and filename of the modified junctions layer (outfall nodes removed).
<li>'''Modified junctions layer:''' Determines the location and filename of the modified junctions layer (outfall node(s) removed).
<li>'''New outfalls layer:''' Determines the location and filename of the new outfalls layer.
<li>'''New outfalls layer:''' Determines the location and filename of the new outfalls layer.
</ol>
</ol>
<br>
<br>
[[File:Junctions_Downstream_Junctions_to_Outfalls_Dialog_a.png]]
[[File:Junctions_Downstream_Junctions_to_Outfalls_Dialog_c.png]]
<br><br>
<br><br>


== Example ==
== Example ==
<br>
<br>
{{Video|name=Animation_Junctions_Downstream_Junctions_to_Outfalls_01a.mp4|width=1235}}
{{Video|name=Animation_Junctions_Downstream_Junctions_to_Outfalls_01b.mp4|width=1236}}
<br>
<br>


Latest revision as of 14:58, 3 May 2024

Introduction

This tool converts junctions on the downstream side of a network to outfall nodes as required by SWMM. An outfall layer with the converted nodes will be created along with a modified junction layer (outfall nodes removed). The contents of these layers need to be copied into the appropriate layers in the SWMM GeoPackage.

Note: This tool relies on the 'From Node' and 'To Node' fields to determine position in the network. The Conduits - Assign node fields processing tool will ensure the 'From Node' and 'To Node' fields are correctly assigned.

Usage

This tool, Junctions - Downstream junctions to outfalls, can be found in the QGIS processing toolbox panel under TUFLOW >> SWMM. To open the Processing Toolbox panel, navigate to 'Processing' in the menubar and select 'Toolbox'.



Parameters

  1. Input junctions: The existing junctions layer.
  2. Selected features only: If node(s) in the junctions layer have been selected using the 'Select Features' tool, this option will become available. If checked on, the tool will only check the selected node(s).
  3. Input conduits: The conduits layer containing the channel(s) to which the junction and outfall node(s) are connected.
  4. Modified junctions layer: Determines the location and filename of the modified junctions layer (outfall node(s) removed).
  5. New outfalls layer: Determines the location and filename of the new outfalls layer.




Example



Up
Back to TUFLOW QGIS Plugin Main Page
Retrieved from "https://wiki.tuflow.com/w/index.php?title=QGIS_SWMM_Junctions_Downstream_Junctions_to_Outfalls&oldid=39551"