Difference between revisions of "TUFLOW Message 2810"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2810 - |alt_msg=NA<br> |type=ERROR |message_desc= |suggestions= |prelink=Message 2809 |uplink=2xxx_TUFL...")
 
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 2810 -  
+
|tuflow_message=CHECK 2810 - No "<font color="blue"><tt>Base Cell Size</tt></font>" command specified in .qcf using cell size in .tgc.
|alt_msg=NA<br>
+
|alt_msg=CHECK 2810 - No "<font color="blue"><tt>Orientation Angle</tt></font>" command specified in .qcf using angle in .tgc.<br>
  
|type=[[ERROR]]
+
|type=[[CHECK]]
|message_desc=
+
|message_desc=The Quadtree Control File (QCF) command <tt><font color="blue">Base Cell Size</font><font color="red"> ==</font></tt> and/or the QCF command <tt><font color="blue">Orientation Angle</font><font color="red"> ==</font></tt> were not implemented, so the cell size and/or the orientation angle will default to the values assigned in the TGC.
|suggestions=
+
|suggestions=If required, include the <tt><font color="blue">Base Cell Size</font><font color="red"> ==</font></tt> and/or the <tt><font color="blue">Orientation Angle</font><font color="red"> ==</font></tt> command in the QCF. <br>
 +
Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information on the available QCF commands.
  
|prelink=[[TUFLOW_Message_2809|Message 2809]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2811|Message 2811]]
 
 
}}
 
}}

Latest revision as of 10:28, 21 October 2024

TUFLOW Message
CHECK 2810 - No "Base Cell Size" command specified in .qcf using cell size in .tgc.

Alternate Message
CHECK 2810 - No "Orientation Angle" command specified in .qcf using angle in .tgc.

Message Type
CHECK

Description
The Quadtree Control File (QCF) command Base Cell Size == and/or the QCF command Orientation Angle == were not implemented, so the cell size and/or the orientation angle will default to the values assigned in the TGC.

Suggestions
If required, include the Base Cell Size == and/or the Orientation Angle == command in the QCF.
Refer to the TUFLOW Manual for more information on the available QCF commands.


Up
Go-up.png 2xxx Messages