TUFLOW Message 2334: Difference between revisions
Content deleted Content added
No edit summary |
No edit summary |
||
| (7 intermediate revisions by 3 users not shown) | |||
Line 1:
{{TUFLOW_Message
|tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file.
|alt_msg=ERROR 2334 - Exceeded limit of rainfall grids in file <BR>
ERROR 2334 - Reading Grid file header information <BR>
ERROR 2334 - Reading Grid file data. Check format and file is complete by viewing in GIS.
|type=[[ERROR]]
|message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br>
Line 13 ⟶ 15:
After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format.
|suggestions=<u>Error 2334 - Reading ESRI Grid file or premature end of file</u><br>Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br>
*<u>[[VM_Export_to_ASC| MapInfo with Vertical Mapper]]</u>
*<u>[[Arc_Export_Raster_to_asc|ArcMap]]</u>
*<u>[[QGIS_Export_Raster_to_asc|QGIS]]</u>
<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>
There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear. <br>
<u>Error 2334 - Reading Grid file header information</u><br>
Ensure the NODATA_value is set to -9999.
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
}}
| |||