Green-Ampt Infiltration Parameters: Difference between revisions

As a consequence of this, there is a less runoff generated as shown in Figure 4. As can be seen, the model is not particularly sensitive to the suction head parameter and this fits with observations made within the literature from other similar studies.<br>

The porosity value represents the volume of dry voids per volume of soil and provides the maximum moisture deficit that is available, the difference between the moisture content at saturation and at the start of the simulation. Sandy soils tend to have lower porosities than clay soils, but drain to lower moisture contents between rainfall events because water is not held as strongly in the soil pores. Therefore, values of porosity tend to be higher for sandy soils when compared to clay soils. As shown in figureFigure 7, the higher the porosity value, then the less runoff that is generated due to increased infiltration although the model is not particular sensitive to the porosity value.<br>