Difference between revisions of "Check Files 1d pit A"

From Tuflow
Jump to navigation Jump to search
(Created page with "This GIS layer contains information on the 1D pits for the simulation.<br> The _1d_nwk_N_check file contains information on the 1D pits.<br> <br> ''...")
 
 
(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
This GIS layer contains information on the 1D pits for the simulation.<br>
 
This GIS layer contains information on the 1D pits for the simulation.<br>
−
The [[Check_Files_1d_nwk_C | _1d_nwk_N_check file]] contains information on the 1D pits.<br>
+
The values for the 1D tabular pit data (e.g. time-series) can be found in the [[Check_Files_1d_pit_inlet_tables |_1d_pit_inlet_tables_check.csv]] file.<br>
 
<br>
 
<br>
 
'''Attributes of pit_A_check'''<br>
 
'''Attributes of pit_A_check'''<br>
Line 7: Line 7:
 
! style="background-color:#005581; font-weight:bold; color:white;" width=75%| Attribute Description
 
! style="background-color:#005581; font-weight:bold; color:white;" width=75%| Attribute Description
 
|-
 
|-
−
| ID||The channel ID.
+
| ID||The pit ID.
 
|-
 
|-
−
| Type||The channel type, see TUFLOW manual for a list of channel types.<br>
+
| Type||The pit type, see the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for a list of pit types.<br>  
−
For example an '''"S"''' type channel is a standard open channel, an '''"R"''' type channel is a rectangular culvert.
+
For example a "Q" stands Q pit, while a "Q(VPI)" type is a Virtual Pipe Inlet.
 
|-
 
|-
−
| Ignore||If the channel is being ignored (the ignore attribute is set to true on the input 1d_nwk file).
+
| VP_Network_ID|| Virtual Pipe Network ID (as an integer) used to determine which outlet(s) the flow into the inlet pits discharges from.
 
|-
 
|-
−
| UCS||The "Use Channel Storage at Nodes" (UCS) setting for the channel.  If set to "T" the channel is contributing to the nodal area tables of the connected nodes.
+
| Inlet_Type||For a VPI or Q pit, the name of a pit inlet type in the Pit Inlet Database. Not used for other pits.
 
|-
 
|-
−
| Len_or_ANA||The length of the channel. <br>
+
| VP_Sur_Index||Only used for VPI pits if using the HPC solver. In the event that the total flow into the VPIs on the same VP_Network_ID exceeds the maximum outflow capacity (see Qmax below), one or more of the VPI flow rates must be modified. The VPIs with the lowest surcharge index are given priority.
−
This can be mapped or selected in GIS to highlight areas where the channels are very short. Short channels (particularly open channels) can drive down the required timestep or introduce stability issues.
 
 
|-
 
|-
−
| n_nF_Cd||The Manning’s n value of the channel (for Blank, C, G, I, R, S Channel Types) or Discharge Coefficient (for RG, SG, SP Channel Types).
+
| VP_QMax||Only used for VPI and VPO if using the HPC solver. For VPOs the maximum flow that can discharge back into the 2D domain. For VPIs the maximum surcharge capacity or flow back on to the 2D domain. To prevent a VPI from surcharging enter a QMax of 0.0 (zero).
 
|-
 
|-
−
| US_Invert||The upstream invert for the channel.
+
| Width||For C pits the diameter of the pit cross-section in the vertical plane. For R and W pits, the width of the pit section in the vertical plane. For all pits the width is used to determine the number of 2D cells to connect.
 
|-
 
|-
−
| DS_Invert||The downstream invert for the channel.
+
| Conn_2D||Used to control the connection type. For pits this field must be blank or set to “SX”. If set to blank, is treated as a SX connection.
 
|-
 
|-
−
| Form_Loss||Any additional form loss applied for the channel.  For B channels this can vary with height and this data is in the .eof file.
+
| Conn_No||Overwrite the automatically determined number of connected 2D cells.
 
|-
 
|-
−
| pBlockage||The percentage blockage of the channel.
+
| pBlockage||The percentage blockage (%) of the pits. Reduces the flow capacity through the pit by the specified amount.
 
|-
 
|-
−
| Inlet_Type||The inlet type for a pit channel.
+
| Number_of||The number of pits.
 
|-
 
|-
−
| Conn_1D_2D||The 1D/2D connection type for a pit channel.
+
| Lag_Approach||Sets the lag approach. <br>
 +
*'''None''' or blank: No lag is applied.
 +
*'''Shift''': Shift method applied.
 +
*'''Decay''': Decay method applied.
 
|-
 
|-
−
| Conn_No||The connection number for a pit channel.
+
| Lag_Value||Lag value in hours.  
 
|-
 
|-
−
| Width_or_Dia||The width or diameter of the channel if specified on the 1d_nwk layer.  For a channel with a cross-section this is output in the [[Check_Files_1d_hydroprop | 1d_hyroprop_check file]].
+
| Invert||The elevation from the 2D cell the pit connects to or that entered via a 1d_nwk layer.
 
|-
 
|-
−
| Height_or_WF||The height or weir factor for the channel (if used).
+
| Q_factor||This is the multiplication factor applied to the discharge to allow for any blockage and/or if Number_of pits is greater than 1.
 
|-
 
|-
−
| Number_of||The number of channels.
+
| i_1d_layer||The integer index of the GIS layer that the pit came from. For example an i_1d_nwk value of 4 would be the 4th input layer (1d_nwk_M08_pits_001) below.<br>
−
|-
+
<font color="blue"><tt>Read GIS Pits </tt></font> <font color="red"><tt>==</tt></font><tt> 1d_nwk_M04_pits_001_P</tt><br>
−
| HConF_or_WC|| Height contraction coefficient for I and R type channels.  For new weir channels if weir coefficient Cd, refer to manual for details on weir equations.
+
<font color="blue"><tt>Read GIS Pits </tt></font> <font color="red"><tt>==</tt></font><tt> 1d_nwk_M05_pits_001_P</tt><br>
−
|-
+
<font color="blue"><tt>Read GIS Pits </tt></font> <font color="red"><tt>==</tt></font><tt> 1d_nwk_M07_pits_998_P</tt><br>
−
| WConF_or_WEx||Width contraction coefficient for C, I and R type channels.  For new weir channels if weir flow equation exponent Ex, refer to manual for details on weir equations.
+
<font color="blue"><tt>Read GIS Pits </tt></font> <font color="red"><tt>==</tt></font><tt> 1d_nwk_M08_pits_001_P</tt>
−
|-
+
|}
−
| EntryC_or_WSa||Entry loss coefficient for C, I and R type channels.  For new weir channels if weir submergence factor "a", refer to manual for details on weir equations.
+
 
−
|-
 
−
| ExitC_or_WSb||Exit loss coefficient for C, I and R type channels.  For new weir channels if weir submergence factor "b", refer to manual for details on weir equations.
 
−
|-
 
−
| i_1d_nwk||The index to the input layer that has created the manhole. For example an '''i_1d_nwk''' value of 4 would be the 4th input layer (1d_nwk_M08_pits_001) below.<br>
 
−
<font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M04_channels_001.MIF</tt><br>
 
−
<font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M05_bridge_001.MIF</tt><br>
 
−
<font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M07_trunk_998.MIF</tt><br>
 
−
<font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M08_pits_001.MIF</tt>
 
−
|-
 
−
| pSlope||Percentage slope of the channel.  A positive slope indicates the upstream invert invert is higher than the downstream invert.  For a negative value this indicates that the channel has an adverse slope.<br>
 
−
This can be mapped or selected in GIS to highlight areas where the channels may be unrealistically steep.
 
  
−
|}
+
{{Tips Navigation
 +
|uplink=[[TUFLOW_Check_Files | TUFLOW Check Files]]
 +
}}

Latest revision as of 10:21, 23 September 2024

This GIS layer contains information on the 1D pits for the simulation.
The values for the 1D tabular pit data (e.g. time-series) can be found in the _1d_pit_inlet_tables_check.csv file.

Attributes of pit_A_check

Attribute Name Attribute Description
ID The pit ID.
Type The pit type, see the TUFLOW Manual for a list of pit types.

For example a "Q" stands Q pit, while a "Q(VPI)" type is a Virtual Pipe Inlet.

VP_Network_ID Virtual Pipe Network ID (as an integer) used to determine which outlet(s) the flow into the inlet pits discharges from.
Inlet_Type For a VPI or Q pit, the name of a pit inlet type in the Pit Inlet Database. Not used for other pits.
VP_Sur_Index Only used for VPI pits if using the HPC solver. In the event that the total flow into the VPIs on the same VP_Network_ID exceeds the maximum outflow capacity (see Qmax below), one or more of the VPI flow rates must be modified. The VPIs with the lowest surcharge index are given priority.
VP_QMax Only used for VPI and VPO if using the HPC solver. For VPOs the maximum flow that can discharge back into the 2D domain. For VPIs the maximum surcharge capacity or flow back on to the 2D domain. To prevent a VPI from surcharging enter a QMax of 0.0 (zero).
Width For C pits the diameter of the pit cross-section in the vertical plane. For R and W pits, the width of the pit section in the vertical plane. For all pits the width is used to determine the number of 2D cells to connect.
Conn_2D Used to control the connection type. For pits this field must be blank or set to “SX”. If set to blank, is treated as a SX connection.
Conn_No Overwrite the automatically determined number of connected 2D cells.
pBlockage The percentage blockage (%) of the pits. Reduces the flow capacity through the pit by the specified amount.
Number_of The number of pits.
Lag_Approach Sets the lag approach.
  • None or blank: No lag is applied.
  • Shift: Shift method applied.
  • Decay: Decay method applied.
Lag_Value Lag value in hours.
Invert The elevation from the 2D cell the pit connects to or that entered via a 1d_nwk layer.
Q_factor This is the multiplication factor applied to the discharge to allow for any blockage and/or if Number_of pits is greater than 1.
i_1d_layer The integer index of the GIS layer that the pit came from. For example an i_1d_nwk value of 4 would be the 4th input layer (1d_nwk_M08_pits_001) below.

Read GIS Pits == 1d_nwk_M04_pits_001_P
Read GIS Pits == 1d_nwk_M05_pits_001_P
Read GIS Pits == 1d_nwk_M07_pits_998_P
Read GIS Pits == 1d_nwk_M08_pits_001_P


Up
Go-up.png TUFLOW Check Files
Retrieved from "https://wiki.tuflow.com/w/index.php?title=Check_Files_1d_pit_A&oldid=40953"