Difference between revisions of "TUFLOW Message 0633"

From Tuflow
Jump to navigation Jump to search
 
Line 8: Line 8:
 
[[CHECK]]
 
[[CHECK]]
 
|message_desc=
 
|message_desc=
|suggestions=Please contact [mailto:support@tuflow.com support@tuflow.com].
+
|suggestions=To convert a GeoTIFF to a format that is compatible with TUFLOW, lease use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.
 +
* Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
 +
* Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure
 +
* Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
 +
: <u>[[Raster_Format_Conversion_Using_gdal_translate#Cloud_Optimised_GeoTIFFs | Converting from Cloud Optimised GeoTIFFs]]</u>
  
  
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
}}
 
}}

Latest revision as of 16:23, 4 January 2024

TUFLOW Message
ERROR 0633 - Header in GeoTIFF is incomplete or missing data - important header information not found.

Alternate Message
ERROR 0633 - Header in GeoTIFF is incomplete or missing data - GeoKeyDirectoryTag.
ERROR 0633 - Header in GeoTIFF is incomplete or missing data - GeoKeyDirectoryTag [2].
CHECK 0633 - GeoTIFF does not contain a 'No Data Value'.

Message Type
ERROR
CHECK

Description


Suggestions
To convert a GeoTIFF to a format that is compatible with TUFLOW, lease use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.

  • Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
  • Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure
  • Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
Converting from Cloud Optimised GeoTIFFs


Up
Go-up.png 0xxx Messages