Check Files 2d sh obj: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
|- |
|- |
||
| Source||The input Z shape (2d_zsh) or variable Z Shape (2d_vzsh) layer. |
| Source||The input Z shape (2d_zsh) or variable Z Shape (2d_vzsh) layer. |
||
|- |
|||
| dx||The model 2D cell size. |
|||
|} |
|} |
||
Latest revision as of 09:46, 26 August 2024
This file contains the breaklines and triangulation that have been used by TUFLOW in applying Z Shape layers.
The breaklines and triangulations are written for each Z shape, provided TUFLOW has not read the object directly from an XF file. If you cannot find the object you are checking in the 2d_sh_obj check layer, it is recommended to re-initalise the model with the XF Files == OFF command.
This file can be very useful if there is an issue in the way the Z shape has been applied, this file is written sequentially and the final object written can be used to find the culprit area.
Attributes of sh_obj
| Attribute Name | Attribute Description |
|---|---|
| Source | The input Z shape (2d_zsh) or variable Z Shape (2d_vzsh) layer. |
| dx | The model 2D cell size. |
For example if an ERROR 2232 has occurred, the suggested diagnoses is to import the sh_obj check file. This file is written sequentially and the last entry is the final abject TUFLOW was able to process. The final triangle is shown in red below:
This highlights that the issue is in the polygon in the 2d_zsh layer highlighted in green:
See ERROR 2232 for a more detailed discussion on this error.
| Up |
|---|
 TUFLOW Check Files
|