Difference between revisions of "TUFLOW Message 1289"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 22: | Line 22: | ||
As of the 2010 version of TUFLOW these fixed field inputs are no longer supported by TUFLOW. These will need to be converted to the 1d_tab format, or a previous version of TUFLOW used. | As of the 2010 version of TUFLOW these fixed field inputs are no longer supported by TUFLOW. These will need to be converted to the 1d_tab format, or a previous version of TUFLOW used. | ||
| − | + | ||
| − | |||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:22, 23 December 2022
TUFLOW Message
ERROR 1289 - ESTRY command in above line is unrecognisable.
Alternate Message
NA
Message Type
ERROR
Description
The ESTRY command is not recognised by TUFLOW.
Suggestions
There are two primary reasons this may occur:
- Incorrect spelling / syntax of TUFLOW command
- Trying to use an unsupported fixed field input
Locate the message in the console window or TUFLOW log file. Check that this is a valid command, e.g. "Read GIS Network" and not "Raed GIS Network".
Check that the model contains no fixed field inputs. Fixed field inputs typically look like the below:
CS 206 2
-2.200 3.310
30.00 50.00
NA 101 3
0. 10. 30.
200000. 500000. 1000000.
NAR 201 200
As of the 2010 version of TUFLOW these fixed field inputs are no longer supported by TUFLOW. These will need to be converted to the 1d_tab format, or a previous version of TUFLOW used.
| Up |
|---|
 1xxx Messages
|