Tuflow

FM Tutorial M01 QGIS SHP x1D Nodes: Difference between revisions

Browse history interactively
← Older edit
Content deleted Content added
VisualWikitext
 
(8 intermediate revisions by 3 users not shown)
Line 6:
== Method ==
 
1. Open the <b>FloodModeller_Nodes_PFloodModeller_Nodes.shp</b> layer from the Module_Data\Module_01\gis folder.
 
2. Save as <b>1d_x1d_FMT_M01_nodes_001_P1d_x1d_FMT_M01_nodes_001.shp</b> within the FMT_tutorial\FMT_M01\TUFLOW\model\gis folder.<br>{{Video|name=Define_External_1D_Networks_SHP.mp4 |width=1123}}
 
<br>
{{Video|name=Define_External_1D_Networks_SHP.mp4 |width=1123}}
<br>
 
3. Open the GIS layer <b>1d_x1d_FMT_M01_nodes_001_P.shp</b> within QGIS.
 
4. Open the attribute table. This layer only has a single attribute correlating to the unique nameNode ID of a RIVER, INTERPOLATE or REPLICATE unit within the Flood Modeller model. Note that the node IDs are case-sensitive as this is a requirement of Flood Modeller. At junctions, both the upstream and downstream nodes must be digitised within this layer. It is often helpful to label the Node IDs.
 
In recent versions of Flood Modeller, it is possible to export the nodes to a TUFLOW Shapefile using the Export->Nodes as TUFLOW Shapefile tool. This can then be used as the 1d_X1D layer. It should however be noted that the model should be correctly georeferenced within Flood Modeller which isn't always the case. The georeferencing of a model network can be a time-consuming process and should be considered at the project outset.▼
 
▲In recent versions of Flood Modeller, it is possible to export the nodes to a TUFLOW Shapefile. This can then be used as the 1d_X1D layer. It should however be noted that the model should be correctly georeferenced within Flood Modeller which isn't always the case. The georeferencing of a model network can be a time-consuming process and should be considered at the project outset.
 
{{Tips Navigation
After creating the GIS layer representing the Flood Modeller nodes for reading into TUFLOW, return to the [[Flood_Modeller_Tutorial_Module01_Provisional#Define_the_1D/2D_Boundary Links|Flood Modeller Tutorial Model]].
|uplink=[[Flood_Modeller_Tutorial_Module01_Provisional#Define the Water Level Lines| Back to Tutorial Module 01 Main Page]]
}}
Retrieved from "https://wiki.tuflow.com/FM_Tutorial_M01_QGIS_SHP_x1D_Nodes"