FM Tutorial M01 QGIS SHP x1D Nodes
Jump to navigation
Jump to search
- Open the FloodModeller_Nodes_P.shp layer from the Module_Data\Module_01\gis folder.
- Save as 1d_x1d_FMT_M01_nodes_001_P.shp within the FMT_tutorial\FMT_M01\TUFLOW\model\gis folder.
- Open the GIS layer 1d_x1d_FMT_M01_nodes_001_P.shp within QGIS.
- Open the attribute table. This layer only has a single attribute correlating to the unique name of a RIVER, INTERPOLATE or REPLICATE unit within the Flood Modeller model. Note that the node IDs are case-sensitive as this is a requirement of Flood Modeller. At junctions, both the upstream and downstream nodes must be digitised within this layer.
Introduction
We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify the spatial location of each of the linked Flood Modeller nodes. This allows TUFLOW to read the water levels from the Flood Modeller model and apply them to the TUFLOW domains as 2D water level boundaries.
Method
In recent versions of Flood Modeller, it is possible to export the nodes to a TUFLOW Shapefile. This can then be used as the 1d_X1D layer. It should however be noted that the model should be correctly georeferenced within Flood Modeller which isn't always the case. The georeferencing of a model network can be a time-consuming process and should be considered at the project outset.
You have now created the GIS layer representing the Flood Modeller nodes for reading into TUFLOW. Return to the Flood Modeller Tutorial Model.