Revision as of 01:35, 28 July 2016 view source Rachel (talk \| contribs) 465 edits →Introduction ← Older edit		Revision as of 01:39, 28 July 2016 view source Rachel (talk \| contribs) 465 edits →Introduction Newer edit →
Line 1: = Introduction = The FMA Challenge models are example TUFLOW models submitted by BMT WBM for the Floodplain Management Association 2-Dimensional Model Challenges, 2012. <br> This Wiki page assumes an intermediate to advanced user level. If you haven't already completed FMA Challenge 1, please see ~~this~~the <u>[[FMA Challenge 1 (1D-2D linked)\|FMA Challenge 1]]</u> page. ~~In this~~This challenge, model investigates a tidally influenced floodplain and riverine system ~~will be explored~~ along the Californian Coast. More information is available in the document '''"FMA Challenge 2 Documention.TUFLOW.docx"''' that is provided withing the ZIP file download. AAll ~~series~~three ofchallenge ~~fully~~models ~~functional~~are ~~example~~presented ~~models~~as ~~have~~a ~~been~~fully ~~developed~~functional examples, allowing you to review the model setup, run the model and review results ~~developing your understanding of:~~.<br> This model specifically shows: Tidal influences on floodplains and riverine systems; Variation in results due to 2D cell resolution and whether or not the model should contain a 1D component; Line 12 ⟶ 13: *The differences between two different 2D solvers, TUFLOW classic and TUFLOW GPU.<br> ~~Notably, a~~A key investigation of this FMA Challange is the performance of the differing 2D solution methods (CPU and GPU) in representing measured flood levels during a historical event. Data for this model is provided via ZIP compressed file available [http://www.tuflow.com/Tuflow%20Tutorial%20Models.aspx on the TUFLOW Downloads Page] under 'Current Demo Models'.

FMA Challenge 2: Difference between revisions