Difference between revisions of "TUFLOW Message 1317"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[WARNING]]
 
|type=[[WARNING]]
|message_desc=Water Level Line (WLL) is being ignored as it doesn't cross a 1D network channel (only valid for WLL with 2 vertices) or snap to a vertix on the 1D network as required for a WLL with three or more vertices.
+
|message_desc=Water Level Line (WLL) is being ignored as it doesn't cross a 1D network channel (only valid for WLL with 2 vertices) or snap to a vertex on the 1D network as required for a WLL with three or more vertices.
 
|suggestions=Ensure WLL snaps to 1D network channel object or cross channel (only if using 2 vertices WLL).
 
|suggestions=Ensure WLL snaps to 1D network channel object or cross channel (only if using 2 vertices WLL).
 
|discussion_page=* [[Talk:TUFLOW Message 1317|Discuss Message 1317]]
 
|discussion_page=* [[Talk:TUFLOW Message 1317|Discuss Message 1317]]

Revision as of 11:51, 11 December 2012

TUFLOW Message
WARNING 1317 - WLL does not cross (2 point WLL only) or snap to 1D channel

Alternate Message
NA

Message Type
WARNING

Description
Water Level Line (WLL) is being ignored as it doesn't cross a 1D network channel (only valid for WLL with 2 vertices) or snap to a vertex on the 1D network as required for a WLL with three or more vertices.

Suggestions
Ensure WLL snaps to 1D network channel object or cross channel (only if using 2 vertices WLL).


Up
Go-up.png 1xxx Messages