Revision as of 15:54, 9 January 2017 view source Chris Huxley (talk \| contribs) Bureaucrats, Administrators 7,786 edits →TUFLOW Geometry Control file (TGC) ← Older edit		Revision as of 16:00, 9 January 2017 view source Chris Huxley (talk \| contribs) Bureaucrats, Administrators 7,786 edits →TUFLOW Geometry Control file (TGC) Newer edit →
Line 81: \| <font color="blue"><tt>Read GIS Code INVERT</tt></font> <font color="red"><tt>==</tt></font> \|\| Used to set the code status of a cell (active or inactive). The inverse value defined by the <font color="blue"><tt>Read GIS Code</tt></font> <font color="red"><tt>==</tt></font> is applied. This feature is most commonly used during in multiple domain 2D2D models, as discussed [[TUFLOW_2D2D_BC_Advice\|here]]. \|- \| '''2d_fcsh_empty''' \|\| <font color="blue"><tt>Read GIS FC Shape</tt></font> <font color="red"><tt>==</tt></font> \|\| Used for 2D flow constrictions to represent additional losses associated with bridges or box culverts. This input only account for flow below the bridge obvert (soffit). \|- \| rowspan=2\|'''2d_gw_empty''' \|\| <font color="blue"><tt>Read GIS GWL</tt></font> <font color="red"><tt>==</tt></font> \|\| rowspan=2\| Ground water level inputs. \|- \| <font color="blue"><tt>Read GIS GWD</tt></font> <font color="red"><tt>==</tt></font> \|- \| '''2d_iwl_empty''' \|\| <font color="blue"><tt>Read GIS IWL</tt></font> <font color="red"><tt>==</tt></font> \|\| Sets the initial water level in the model at the start of the simulation. The initial water level can vary spatially within the model. An equivalent initial Water level command also exists in the TCF. \|- \| '''2d_Ifcsh_empty''' \|\| rowspan=2\| <font color="blue"><tt>Read GIS Layered FC Shape</tt></font> <font color="red"><tt>==</tt></font> \|\| rowspan=2\| Used for 2D flow constrictions to represent additional losses associated with bridges or box culverts. This input includes accounts for flow above and below the bridge obvert (soffit). \|- \| '''2d_lfcsh_empty_pts''' \|-.▼ \| '''~~2d_z_empty~~2d_loc_empty''' \|\| <font color="blue"><tt>Read GIS ~~Z Line~~Location</tt></font> <font color="red"><tt>==</tt></font> \|\| Used to define the 2D mesh (grid) origin and orientation.▼ \|- \| '''~~2d_loc_empty~~2d_mat_empty''' \|\| <font color="blue"><tt>Read GIS ~~Location~~MAT</tt></font> <font color="red"><tt>==</tt></font> \|\| Used to define 2D materials (land use) inputs. \|- \| '''~~2d_mat_empty~~2d_soil_empty''' \|\| <font color="blue"><tt>Read GIS ~~MAT~~Soil</tt></font> <font color="red"><tt>==</tt></font> \|\| Used to define 2D soil type inputs for infiltration parameterisation \|- \| '''~~2d_soil_empty~~2d_vzsh_empty''' \|\| <font color="blue"><tt>Read GIS ~~Soil~~Variable Z Shape</tt></font> <font color="red"><tt>==</tt></font> \|\| Used to define the final 3D shape of the Zpts at the completion of a breach, or other change in topographic shape, during a simulation. \|- \| '''~~2d_vzsh_empty~~2d_z_empty''' \|\| <font color="blue"><tt>Read GIS ~~Variable~~ Z ~~Shape~~Line</tt></font> <font color="red"><tt>==</tt></font> \|\| Used to update topography within a model. Polylines that are treated as breaklines in the model’s bathymetry, with the breakline height or elevation varying along its length. ▲\|- ▲\| '''2d_z_empty''' \|\| <font color="blue"><tt>Read GIS Z Line</tt></font> <font color="red"><tt>==</tt></font> \|\| \|- \| '''2d_zsh_empty''' \|\| <font color="blue"><tt>Read GIS Z Shape</tt></font> <font color="red"><tt>==</tt></font> \|\|

TUFLOW Empty Files: Difference between revisions