TUFLOW Empty Files

Introduction

The native non-Graphical User Interface (GUI) form of TUFLOW uses Geographic Information System (GIS) files for its spatial inputs. TUFLOW requires precise GIS file formats associated with specific TUFLOW commands. For example, the 1d_zsh_empty file associated with the Read GIS Z Shape == command requires the following data fields and types in the order shown below:

Because of the file format requirement, the first task in any modelling project is to write template (empty) GIS files (as demonstrated in Tutorial Module 1).
This page of the TUFLOW Wiki provides a reference list of the template (empty) GIS files, the associated TUFLOW command and a basic description of their function.

TUFLOW Control file (TCF)

Template (empty) GIS File	Compatible TUFLOW Commands	File / Command Function
2d_fc_empty	Read GIS FC ==	Used for 2D flow constrictions, representing additional losses associated with bridges or box culverts. This command has been superseded with the TGC commands: Read GIS FC Shape Read GIS Layered FC Shape. The template file and command only remain for the purpose of version backward compatibility.
2d_glo_empty	Read GIS GLO ==	Used to define gauge level output (2d_glo) locations. The GLO command controls map output based on the height of the water at a specified location within the model domain.
2d_iwl_empty	Read GIS IWL ==	Sets the initial water level in the model at the start of the simulation. The initial water level can vary spatially within the model. An equivalent initial Water level command also exists in the TGC.
2d_lp_empty	Read GIS LP ==	This file contains details on the location of longitudinal profile outputs.
2d_oz_empty	Read GIS Output Zone ==	This file contains one or more polygons defining the 2D regions to be output. This model input is used with the command Model Output Zones.
2d_po_empty	Read GIS PO ==	This file contains lines and points defining plot output (PO) locations for 2D result time series graphs in Excel. PO only extracts results from 2D portions of the model. 1D results are ignored.
0d_rl_empty	Read GIS Reporting Location ==	This file contains lines and points defining plot output (PO) locations for 1D and 2D result time series graphs in Excel.
Note: Template shapefiles will also include a suffix describing the object type: _L = Lines features _P = Point features _R = Region features

ESTRY Control file (ECF)

Template (empty) GIS File	Compatible TUFLOW Commands	File / Command Function
1d_bc_empty	Read GIS BC ==	Used to define the location and type of 1D boundary condition input
1d_iwl_empty	Read GIS IWL ==	Used to set the initial water level within a 1D channel or node at the start of a simulation.
1d_mh_empty	Read GIS Manhole ==	Used to define manhole locations and attributes.
1d_nd_empty	Read GIS Node ==	Used to define 1D node locations and attributes.
1d_nwk_empty	Read GIS Network ==	Used to define channel and node locations and attributes. Common channel types include, open channels, culverts, bridges, weirs.
1d_nwke_empty	Read GIS Network ==	Used to define grouped structure locations and attributes. For example, weirs representing overtopping of a bridge or culvert structure can be specified using a single GIS feature in the 1d_nwke file. By comparison, multiple line features would be required if the same input was defined in a 1d_nwk file.
1d_pit_empty	Read GIS Pits ==	Defines the location and attributes associated with virtual pipes for a GPU model.
1d_tab_empty	Read GIS Table Links ==	Reads links to tabular inputs associated with cross-section profiles (1d_xs), nodal surface areas (1d_na) and bridge loss coefficients (1d_bg).
1d_WLL_empty	Read GIS WLL ==	Used to translate 1D results into 2D map output for viewing in SMS, WaterRide, Blue Kenu and GIS Software.
Note: Template shapefiles will also include a suffix describing the object type: _L = Lines features _P = Point features _R = Region features

TUFLOW Geometry Control file (TGC)

Template (empty) GIS File	Compatible TUFLOW Commands	File / Command Function
2d_bc_empty	Read GIS Code BC ==	Used to set the code status of a cell (active or inactive). This is an alternative method to: "2d_code_empty / Read GIS Code ==". Note: "2d_bc_empty" CANNOT be used with Read GIS Code ==
	Read GIS Z HX Line ==	Used in combination with 2d_bc (HX) layer from the TBC to set the cell elevations along HX lines at the interface between 1D channels nested with a 2D domain.
2d_code_empty	Read GIS Code ==	Used to set the code status of a cell (1 = active or 0 = inactive).
	Read GIS Code INVERT ==	Used to set the code status of a cell (active or inactive). The inverse value defined by the Read GIS Code == is applied. This feature is most commonly used during in multiple domain 2D2D models, as discussed in Multiple 2D Modelling Advice.
2d_fcsh_empty	Read GIS FC Shape ==	Used for 2D flow constrictions to represent additional losses associated with bridges or box culverts. This input only account for flow below the bridge obvert (soffit).
2d_gw_empty	Read GIS GWL ==	Ground water level inputs.
	Read GIS GWD ==
2d_iwl_empty	Read GIS IWL ==	Sets the initial water level in the model at the start of the simulation. The initial water level can vary spatially within the model. An equivalent initial Water level command also exists in the TCF.
2d_Ifcsh_empty	Read GIS Layered FC Shape ==	Used for 2D flow constrictions to represent additional losses associated with bridges or box culverts. This input includes accounts for flow above and below the bridge obvert (soffit).
2d_lfcsh_empty_pts
2d_loc_empty	Read GIS Location ==	Used to define the 2D mesh (grid) origin and orientation.
2d_mat_empty	Read GIS MAT ==	Used to define 2D materials (land use) inputs.
2d_soil_empty	Read GIS Soil ==	Used to define 2D soil type inputs for infiltration parameterisation
2d_vzsh_empty	Read GIS Variable Z Shape ==	Used to define the final 3D shape of the Zpts at the completion of a breach, or other change in topographic shape, during a simulation.
2d_z_empty	Read GIS Z Line ==	Used to update topography within a model. Polylines are treated as breaklines in the model’s topography (with the breakline height or elevation varying along its length). This command has been superseded with the TGC commands: Read GIS GIS Z Shape The template file and command only remain for the purpose of version backward compatibility.
2d_zsh_empty	Read GIS Z Shape ==	Used to update topography within a model. Polylines are treated as breaklines in the model’s topography (with the breakline height or elevation varying along its length). Polygons and point features can be used to create TINs which are either independent of, or alternatively merge with the surrounding topography.
2d_zshr_empty	Read GIS Z Shape Route ==	Used to provide output on the degree of inundation along evacuation routes. This feature is useful during flood evacuation assessments. The model output includes details on warning time, flood hazard (e.g. depth and velocity) and duration that an evacuation route is isolated.
Note: Template shapefiles will also include a suffix describing the object type: _L = Lines features _P = Point features _R = Region features

TUFLOW Boundary Control file (TBC)

Template (empty) GIS File	Compatible TUFLOW Commands	File / Command Function
2d_bc_empty	Read GIS BC ==	Used to define the location and attributes of 2D model boundary conditions. Including: External flow verse time boundaries External flow verse water level boundaries External water level verse time boundaries Internal 1D/2D connections Internal 2D/2D connections
2d_rf_empty	Read GIS RF ==	Used for "direct rainfall" modelling, also called "rainfall on grid" or "distributed hydrology" modelling.
2d_sa_empty	Read GIS SA ==	Used to define the location of internal source area flow verse time boundaries.
	Read GIS Streams ==
2d_sa_rf_empty	Read GIS SA RF ==	Used to define the location of internal source area flow verse time boundaries. The model input is specified using rainfall hyetographs (mm versus hours) instead of flow hydrographs (flow verse time).
Note: Template shapefiles will also include a suffix describing the object type: _L = Lines features _P = Point features _R = Region features

Return to Tutorial Module 1</u?