Difference between revisions of "TUFLOW Message 2212"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=2D SA PIT option (.tbc command: <font color=" | + | |message_desc=2D SA PIT option (.tbc command: <font color="blue"><tt>Read GIS SA PITS </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><2d_sa layer></tt></font>) directs the inflow only to 2D cells that are connected to a 1D pit or node connected to the 2D domain using '''SX''' for the Conn_2D 1d_nwk attribute. The inflow is spread equally over the applicable 2D cells. Within this polygon no SX type cells connected to pits are found. |
| − | |suggestions=Check location of 2d_sa objects and pits, ensure pit objects have '''SX''' connection to the 2D model domain. Use <font color=" | + | |suggestions=Check location of 2d_sa objects and pits, ensure pit objects have '''SX''' connection to the 2D model domain. Use <font color="blue"><tt>Read GIS SA </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><2d_sa layer></tt></font> instead of <font color="blue"><tt>Read GIS SA PITS </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><2d_sa layer></tt></font> for polygons with no pits. |
|discussion_page=* [[Talk:TUFLOW Message 2212|Discuss Message 2212]] | |discussion_page=* [[Talk:TUFLOW Message 2212|Discuss Message 2212]] | ||
|link3='' | |link3='' | ||
Revision as of 10:42, 27 June 2022
TUFLOW Message
ERROR 2212 - No 2D SX pit cells within SA PIT inflow polygon.
Alternate Message
NA
Message Type
ERROR
Description
2D SA PIT option (.tbc command: Read GIS SA PITS == <2d_sa layer>) directs the inflow only to 2D cells that are connected to a 1D pit or node connected to the 2D domain using SX for the Conn_2D 1d_nwk attribute. The inflow is spread equally over the applicable 2D cells. Within this polygon no SX type cells connected to pits are found.
Suggestions
Check location of 2d_sa objects and pits, ensure pit objects have SX connection to the 2D model domain. Use Read GIS SA == <2d_sa layer> instead of Read GIS SA PITS == <2d_sa layer> for polygons with no pits.
| Up |
|---|
 2xxx Messages
|