TUFLOW Message 2232: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself. An example of a self intersecting region is shown below, click on image for a larger view.<br> |
|message_desc=TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself. An example of a self intersecting region is shown below with (the blue circles highlight the problem areas), click on image for a larger view.<br> |
||
[[File:Self Intersecting Polygon.png|500px]] |
[[File:Self Intersecting Polygon.png|500px]] |
||
Revision as of 08:14, 22 February 2011
TUFLOW Message
ERROR 2232 - Failed to complete triangulation. Check region perimeter does not cross or snap onto itself.
Alternate Message
NA
Message Type
ERROR
Description
TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself. An example of a self intersecting region is shown below with (the blue circles highlight the problem areas), click on image for a larger view.
Suggestions
Check region perimeter does not cross or snap onto itself.
| Up |
|---|
 2xxx Messages
|