1D Integrity Tool: Difference between revisions

<li> '''Input Network Lines''' - input location of 1d_nwk lines such as pipes, culverts, and open channels. Use dropdown box and '+' button to add layers as inputs to tool.

<li> '''Input Network Points''' - input location of 1d_nwk points such as pits and nodes. Use dropdown box and '+' button to add layers as inputs to tool.

<li> '''Input Tables''' - input location of 1d_ta lines such as 1d_xs, 1d_cs, and 1d_hw. Use dropdown box and '+' button to add layers as inputs to tool.

<li> '''Input DEM''' - input raster. Currently only 1 input is supported, so if you are using tiled rasters datasets, they would need to be mosaiced into a single raster prior to running the tool.

<li> '''Tool selection''' - the active tab will determine the active tool. Prior to plugin version 3.2 a radio button was used to select the active tool.

<li> '''Status Bar''' - contains the progress bar and status of the integrity tool. Includes information such as the current active task being performed (if the one of the tools is running), the previously completed tool, and if the previous task completed successfully or contained an error.

<li> '''Run''' - runs the currently active tool (active tool determined by the current active tool tab - prior to plugin version 3.2 a radio button was used to select the active tool).