TUFLOW Message 2231: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=When using <font color="blue"><tt>Read GIS Z HX Line</tt></font> points with type '''ZP''' are snapped along the '''HX''' line to set the elevation of the 2D cells along 1D/2D connection. For the '''ZP''' points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a '''HX''' line has been found without any attached '''ZP''' points. This line is not modifying any cell elevations. |
|message_desc=When using <font color="blue"><tt>Read GIS Z HX Line</tt></font> points with type '''ZP''' are snapped along the '''HX''' line to set the elevation of the 2D cells along 1D/2D connection. For the '''ZP''' points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a '''HX''' line has been found without any attached '''ZP''' points. This line is not modifying any cell elevations. |
||
|suggestions=Check '''HX''' line to see if a breakline is intended. |
|suggestions=Check '''HX''' line to see if a breakline is intended. |
||
|discussion_page=* [[Talk:TUFLOW Message 2231|Discuss Message 2231]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_2230|Message 2230]] |
|prelink=[[TUFLOW_Message_2230|Message 2230]] |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
Revision as of 16:30, 6 July 2022
TUFLOW Message
CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts.
Alternate Message
NA
Message Type
CHECK
Description
When using Read GIS Z HX Line points with type ZP are snapped along the HX line to set the elevation of the 2D cells along 1D/2D connection. For the ZP points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a HX line has been found without any attached ZP points. This line is not modifying any cell elevations.
Suggestions
Check HX line to see if a breakline is intended.
| Up |
|---|
 2xxx Messages
|