TUFLOW Message 2541: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
|tuflow_message=ERROR 2541 - SX polygon selects no cells. |
|tuflow_message=ERROR 2541 - SX polygon selects no cells. |
||
|alt_msg=CHECK 2541 - SX polygon selects no cells, centroid used. |
|alt_msg=CHECK 2541 - SX polygon selects no cells, centroid used. |
||
|alt_msg=CHECK 2541 - SX polyline selects no cells, using midpoint. |
|||
|type=[[ERROR]] [[CHECK]] |
|type=[[ERROR]] [[CHECK]] |
||
|message_desc=No cell centre falls within SX polygon. If the message type is "CHECK", the SA polygon centroid still falls within the active model domain and the centroid will be used to choose the nearest cell as a connection between 1D and 2D. If the message type is "ERROR", the SA polygon centroid falls outside the model and the TUFLOW will exit with error. |
|message_desc=No cell centre falls within SX polygon. If the message type is "CHECK", the SA polygon centroid still falls within the active model domain and the centroid will be used to choose the nearest cell as a connection between 1D and 2D. If the message type is "ERROR", the SA polygon centroid falls outside the model and the TUFLOW will exit with error. If CHECK 2541 appears for a polyline, the 2D cell in which the midpoint of the SX line falls within will be used as the connection location. |
||
|suggestions=Review the SX polygon size and check if it is located inside the active model domain. |
|suggestions=Review the SX polygon size and check if it is located inside the active model domain. |
||
Revision as of 21:23, 19 February 2024
TUFLOW Message
ERROR 2541 - SX polygon selects no cells.
Alternate Message
CHECK 2541 - SX polyline selects no cells, using midpoint.
Description
No cell centre falls within SX polygon. If the message type is "CHECK", the SA polygon centroid still falls within the active model domain and the centroid will be used to choose the nearest cell as a connection between 1D and 2D. If the message type is "ERROR", the SA polygon centroid falls outside the model and the TUFLOW will exit with error. If CHECK 2541 appears for a polyline, the 2D cell in which the midpoint of the SX line falls within will be used as the connection location.
Suggestions
Review the SX polygon size and check if it is located inside the active model domain.
| Up |
|---|
 2xxx Messages
|