Tutorial M05: Difference between revisions
Content deleted Content added
Line 41:
*'''pit_inlet_curves.csv'''
*'''pit_inet_dbase.csv'''
<li>Open the '''pit_inlet_dbase'''. The three different names are user defined inlet types matching the attribute in 1d_nwk pits file. They define the inflow into the pit depending on the above ground water depth and are derived based on the geometry of the pits. These can be unique to every model. From the '''pit_inlet_dbase''', ‘AB’ inlet type has an area of 0.54m<sup>2</sup> and width of 3.6m and references the ‘Type AB’ in the flow column from the '''pit_inlet_curves''' file.<br>
<br>
[[File:M05 pit inlet dbase_01.png]]<br>
<br>
<li>Open the '''pit_inlet_curves''', it defines the depth discharge relationship for each pit inlet type.
<li>Plot the depth against flow for each pit type to view the relationship. The curves are the limiting factor for the amount of flow entering the pits. <br>
<br>
| |||