Tuflow

TUFLOW SWMM Tutorial M02: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 138:
<li>In the Processing Toolbox, select the 'Edit Features In-Place' tool [[File:edit_features_in_place_icon.png]]. This allows the editing of an existing layer, instead of the creation of a new layer.
<li>Go to TUFLOW > SWMM in the processing tool list and select 'Conduits - Assign losses'. This opens the dialog shown below.
<ol><li>*Select the inlet usage layer: '''Nodes--Outfalls'''.
<li>*Entrance loss furthest upstream = 0.5
<li>*Entrance loss for channels not furthest upstream = 0.2
<li>*Exit loss furthest downstream = 1.0
<li>*Exit loss for channels not furthest downstream = 0.4
<li>*Select 'Modify All Features'.
<li>*Once the tool has finished, click 'Close'.
</ol>
</ol>
 
Retrieved from "https://wiki.tuflow.com/TUFLOW_SWMM_Tutorial_M02"