Revision as of 19:46, 6 December 2023 view source Chris Huxley (talk \| contribs) Bureaucrats, Administrators 7,789 edits →Update Losses ← Older edit		Revision as of 19:51, 6 December 2023 view source Chris Huxley (talk \| contribs) Bureaucrats, Administrators 7,789 edits →Update SWMM Inlet Usage Layer Details Tag: Visual edit Newer edit →
Line 117: The following updates are being made to Objects and Layers within '''TS01_002.gpkg''' ===Update SWMM Inlet Usage Layer Details=== An Inlet Useage Layer has been provided, '''~~SWMM_IU_TS02_001~~swmm_iu_TS02_001'''. This Layer defines the physical location of inlets to the pipe network. It also defines some of the site specific geomtry, such as Inlet, Elevation, Slope, Placement type (on-grade or on-sag). If you do not have a copy of this file avaiable for your modelling during a project, you will need to create it using the empty template file available from '''model/gis/empty/swmm_iu_empty.gpkg ''', created during the initial Write Emptys step of the model build process (refer to TUFLOW Tutorial Model 1). The "Inlet" Attribute in the Inlet Useage Layer is an ID reference to inlet geometry and associated information listed within the '''Inlets''' database included in '''TS02_001.gpkg'''. A single inlet type was referenced in the Inlet Useage Layer object attributes, "Combo1". We need to create the entry for "Combo1" in the '''Inlet''' Layer. Line 155: <li>In the Processing Toolbox, select the 'Edit Features In-Place' tool [[File:edit_features_in_place_icon.png]]. This allows the editing of an existing layer, instead of the creation of a new layer. <li>Go to TUFLOW > SWMM in the processing tool list and select 'Conduits - Assign losses'. This opens the dialog shown below. Select the inlet usage layer: '''~~SWMM_IU_TS02_001~~swmm_iu_TS02_001'''. Entrance loss furthest upstream = 0.5 *Entrance loss for channels not furthest upstream = 0.2 Line 176: ::<li>Click the ... and select 'Save to GeoPackage'. ::<li>Navigate to the '''TUFLOW\model\swmm''' folder and select '''TS01_001.gpkg'''. Click Save. ::<li>A dialog will open. In the Layer Name box, write '''~~2d_bc_SWMM_Connections_001_L~~2d_bc_SWMM_Pipe_Network_Connections_001_L'''. ::<li>Click 'OK'. </ol> <li>Click 'Run'. <li>Once the tool is finished, click 'Close'.

TUFLOW SWMM Tutorial M02: Difference between revisions