TUFLOW SWMM Tutorial M01 Check QGIS: Difference between revisions
Content deleted Content added
Chris Huxley (talk | contribs) |
Chris Huxley (talk | contribs) No edit summary |
||
Line 4:
:*[[Check_Files_1d_to_2d_bc | _1d_to_2d_check_R]]
== Review SWMM Check Files ==
When TUFLOW runs SWMM it can acomodate for multiple INP input files within the SWMM Control file. TUFLOW combines the input INP files into a single compbined INP file for the simulation execution. The combined file that TUFLOW uses is written to the '''TUFLOW/results''' folder. The QGIS TUFLOW Plugin SWMM Processing Tool,
<ol>
<li>In the Processing Toolbox, select the 'GeoPackage - Create from SWMM inp' tool.
<li> Select: GeoPackage Input File: Navigate to the '''TUFLOW\results''' folder and select '''TS01_5m_001_swmm.inp'''.
<li> Set the CRS for GepPackage: WGS 84 / UTM Zone 60S.
<li> Leave SWMM Tags to ignore blank.
<li> Set the GeoPackage output filename: TS01_5m_001_swmm_check.gpkg
<li>Click 'Run'.
<li>Once the tool is finished, click 'Close'.
<li>The '''TS01_5m_001_swmm_check.gpkg''' will now be located in the '''TUFLOW\results''' folder.
</ol>
<br>
<ol>
<li> Open TS01_5m_001_swmm_check.gpkg in QGIS. When prompted, open all Layers inculded in the GepPackage.
<li> Review the '''Links--Conduit''', '''Node--Junction''', '''Nodes--Outfall''' and '''Project--Options''' match the input values that were entered.
</ol>
<br>
<font color="red">'''<< Add video >>'''</font>
== Review the TUFLOW Check Files ==
<ol>
<li>Open the files, either:
:*Within the QGIS Browser Panel, navigate to '''TUFLOW_SWMM_Module_01\TUFLOW\check\TS01_5m_001_Check.gpkg''' and double click the following layers, or
::*'''TS01_5m_001_grd_check_R'''
::*'''TS01_5m_001_1d_to_2d_check_R'''
:*In Windows Explorer, navigate to the '''TUFLOW_SWMM_Module_01\TUFLOW\check''' folder, drag and drop the '''TS01_5m_001_Check.gpkg''' into the QGIS workspace and select the layers above (hold Ctrl to select multiple).
<li>Use the 'Apply TUFLOW Styles to Open Layers'.
| |||