TUFLOW SWMM Tutorial M02: Difference between revisions

<li>SaveNavigate ato copy ofthe '''swmm_iu_TS02_001TUFLOW_SWMM_Module_02\Tutorial_Data''' fromfolder and save a copy of '''TUFLOW_SWMM_Module_02\Tutorial_Dataswmm_iu_TS02_001''' toin the '''TUFLOW_SWMM_Module_02\TUFLOW\Model\swmm''' folder.<br>

When you progress from this tutorial to project modelling, you will need to create an Inlet Usage Layer yourself. The template file for this is available from '''model/\gis/\empty/\swmm_iu_empty.gpkg'''. The file is created during the initial Write Empty step of the model build process (refer to <u>[[Tutorial_M01#Project_Initialisation | TUFLOW Tutorial Model 1]]</u>).

The "Inlet" Attribute within the Inlet Usage Layer is an ID reference to inlet geometry and associated information listed within '''TS02_001sw02_001.gpkg''' >> '''LinksInlets--InletsInlet'''. A single inlet type, 'Combo1', was referenced in the provided Inlet Usage Layer inputs, "Combo1"'''swmm_iu_TS02_001'''. In recognition of this we need to create the entry for "Combo1" in the '''Inlets--Inlet''' Layer.

<li>In the QGIS Layers Panel, select (left click) '''Inlets--Inlet''' and toggle on editing.

<li>Right click '''Inlets--Inlet''' and Selectselect '''Open Attribute Table'''.

<li>ToggleTurn off editing andto save the updateedits.