TUFLOW SWMM Tutorial M02: Difference between revisions

The 1D SWMM / 2D TUFLOW linkage locations to connect the pipe network inlets to the surface have been already automatically been defined in the SWMM Inlet Usage Layer, '''swmm_iu_TS02_001''', using the 'Conn1D_2D' attribute.

::<li>Navigate to the '''TUFLOW\model\swmm''' folder and select '''sw02_001.gpkg'''. Click 'Save'.

::<li>A dialog will open. In the Layer Namename box, write '''2d_bc_SWMM_Pipe_Network_Connections_001_L'''.

<li>The 'BC - Create channel endpoint 1D/2D connections' tool has created 1D connections at the upstream and downstream end of the selected pipe. We only require the downstream outlet objects, as all pipe network inlets are defined in '''swmm_iu_TS02_001'''. Thus, we can delete the connections from the upstream end of the pipe (two CN and one HX lines)., as all pipe network inlets are defined in '''swmm_iu_TS02_001'''