Revision as of 10:33, 21 December 2023 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,379 edits →1D/2D Linking ← Older edit		Revision as of 11:10, 21 December 2023 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,379 edits →SWMM Options Newer edit →
Line 262: ==SWMM Options== The model we are building will use two SWMM INP files. '''sw01_001.inp''' was already created in TUFLOW SWMM Tutorial Module 1. It contained details defining the three culverts under the roads in the model. It also contained the associated 1D SWMM / 2D TUFLOW connection ~~Layer~~layer objects and the '''Project--Options''' necessary to execute the SWMM simulation. '''sw01_001.inp''' has been included in the base model we are using for Module 2. No changes will be made to it. We will create a new INP file for the SWMM pipe network inputs (covered in the next section). As SWMM Options are already included in '''sw01_001.inp''', they are not needed in this second (new) INP file. As such, no new SWMM Option commands are necessary for this tutorial. '''Note:''' If '''Project--Options''' are included in multiple GeoPackage/INP files, the entry that is referenced lowest in the TUFLOW SWMM Control File (TSCF) will be used.

TUFLOW SWMM Tutorial M02: Difference between revisions