Revision as of 10:13, 9 July 2012 view source tuflow>Par No edit summary ← Older edit		Revision as of 10:00, 30 June 2022 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,385 edits No edit summary Newer edit →
Line 4: \|type=[[ERROR]] \|message_desc=Could not find a connection (CN object) snapped to the end of the 1D/2D interface (HX) line. Check that any connection object is snapped; add a connection to the end of the 1D/2D interface; or edit the 1D/2D interface line. 1D/2D interface lines based on the HX type must have as a minimum a connection at each of its ends, otherwise it is not clear how to transfer the water level gradient from the 1D domain. \|suggestions=The messages.mif or messages_P.shp file should contain the location that this error is occurring. Zoom into the HX line and check that the connection line is snapped to the end vertices of the line. This line can have CN connections snapped to intermediate vertices, but ~~<u>'''~~must ~~'''</u>~~ have a CN line snapped to each end. \|discussion_page=* [[Talk:TUFLOW Message 2061\|Discuss Message 2061]] \|link3=''

TUFLOW Message 2061: Difference between revisions