Revision as of 15:37, 21 November 2024 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,384 edits →Fuzzy Map ← Older edit		Revision as of 10:59, 22 November 2024 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,384 edits →EGC commands Newer edit →
Line 304: \|Read GIS XS == <1d_cut GIS file>\|\| Reads the cross-section cut lines, these are described above. \|- \|Read GIS FLC == <GIS file>\|\| Optional GIS layer of polygons that can be used to specify form loss coefficients to the 1d_nwk layer. A single GIS (float) attribute is required. A FLC value of greater than 0 will be split between all 1d_nwk channels within the region. A FLC value of less than 0, will apply the absolute value to all channels within the polygon. For example if an FLC value of -0.1 is specified, all channels that fall within the polygon will have a form_loss attribute of 0.1. If a channel falls within multiple polygons, the form loss values will be added. ~~Reads the polygons off losses from GIS layer. cross-section cut lines, these are described above.~~ \|- \|Set XS dx == <distance>\|\| Sets the default distance across section to extract elevations and materials data. This can be specified on the cut lines as detailed above.

GRID to GRID draft: Difference between revisions