FM Tutorial M01 QGIS SHP x1D Nodes: Difference between revisions

= Introduction =

We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify the spatial location of each of the linked Flood Modeller nodes. This allows TUFLOW to read the water levels from the Flood Modeller model and apply them to the TUFLOW domains as 2D water level boundaries.

 

<li> Open the <b>FloodModeller_Nodes_P.shp</b> layer from the Module_Data\Module_01\gis folder.</li>

<li> Save as <b>1d_x1d_FMT_M01_nodes_001_P.shp</b> within the FMT_tutorial\FMT_M01\TUFLOW\model\gis folder.

<br>You have now created the GIS layer representing the Flood Modeller nodes for reading into TUFLOW. Return to the [[Flood_Modeller_Tutorial_Module01_Provisional#Define_the_1D/2D_Boundary Links|Flood Modeller Tutorial Model]].<br>