Flood Modeller Tutorial Module01 Provisional: Difference between revisions
Content deleted Content added
Line 72:
=TUFLOW Boundary Control File (TBC)=
*Add the 1D/2D boundaries that link the Flood Modeller open channel to the 2D floodplain
Line 139:
</ol>
In the FMT_M01\Flood_Modeller folder, we have provided a complete Flood Modeller model. It is located in the DAT, IED and IEF folders.<br>
The DAT and IED files are complete and will not require any modification to link to TUFLOW.<br>
However, we will alter the IEF to create the link. The IEF alterations can be done either in a text editor of your choice or using the Flood Modeller Interface.<br>
The instructions below have been written for the Flood Modeller Interface version 7.2.
<ol>
<li> Open Flood Modeller. Select 'Load 1D Network'. Navigate to '''\FMT_Tutorial\FMT_M01\Flood_Modeller\DAT''' and load the '''FMT_M01_001.dat'''.</li>
Line 168:
*2-d Scheme: TUFLOW
*2-d Timestep: 2
*Check the box for ‘Perform corrective 1D timestep’
*2-d control file: full path to the '''FMT_M01_001.tcf''' from the '''\FMT_Tutorial\FMT_M01\TUFLOW\runs''' folder
Line 186:
To run the linked TUFLOW-Flood Modeller Pro model using HPC we simply need to add a single line to the Tuflow Control File. The HPC solver will only speed up the 2D calculations within the linked 1D-2D model, it will not speed up the 1D calculations that take place in the Flood Modeller Engine.
| |||