Content deleted Content added
|
|
|
If you also have the raster image added to the view you will see the following. The 1m/s is drawn at the length in the field '''Arrow Scale'''. The colour of the arrows is the same colour as the tin (see '''Tins->Tin manager''').
<br>[[File:RoadflowVelocityContours.png]]<br>
One method of enquiringinquiring the contour values is via '''Tin Inquire Height'''. No need to select a tin if there is only one tin on the view. Move the pointer to a contour and the velocity is displayed.
<br>[[File:Tin Height Inquire Velocity.png]]<br>
<br>
== Viewing results at Various Times==
<br>
Recall selecting the '''Results Controls''' button above (the same panel can be obtained via the menu '''Design->TUFLOW->TMO tin settings'''). The '''TimestepTime step''' is set to '''maximums''' when the results are read. the '''<''' and '''>''' arrows can be used to move to the previous and next time step. Alternatively, enter a time step in the '''Time step''' field and select '''Set'''. The modelling time will be displayed in the message area of the panel. If you enter a number greater than or equal to the '''Results available''' the maximum values at each cell centre will be displayed. The TUFLOW tmo format produces results at the cell centres.<br>
<br>[[File:TUFLOW Tin Results Settings prev next.png]]<br>
ReferingReferring back to the 3d vewview, the results are displayed for all of the cells, wet or dry. To show hide the dry cells select BOTH the '''Use wet/dry flag''' and '''Hide dry cells''. The '''Use wet/dry flag''' alone will change the colour of the tin solid to green (dry) or blue (wet).
=Sections Under Construction=
|