Difference between revisions of "Check Files 1d nwk N"
Jump to navigation
Jump to search
Rohan.king (talk | contribs) m |
|||
| Line 34: | Line 34: | ||
<font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M07_trunk_998.MIF</tt><br> | <font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M07_trunk_998.MIF</tt><br> | ||
<font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M08_pits_001.MIF</tt> | <font color="blue"><tt>Read GIS Network </tt></font> <font color="red"><tt>==</tt></font><tt> mi\1d_nwk_M08_pits_001.MIF</tt> | ||
| + | |- | ||
| + | | No_Channels|| | ||
| + | |- | ||
| + | | Pit_Connected|| | ||
|} | |} | ||
Revision as of 15:04, 13 October 2016
This GIS layer contains information on the 1D nodes for the simulation.
The _1d_nwk_C_check file contains information on the 1D channels.
Attributes of nwk_N_check
| Attribute Name | Attribute Description |
|---|---|
| ID | Node ID. |
| Type | Node Type, the options are:
|
| Ignore | If the node is being ignored (the ignore attribute is set to true on the input 1d_nwk file). |
| Bed_Level | The bed or lowest elevation at the node. |
| ANA | Any additional nodal area that has been added at the node (value in square metres or square feet). |
| Conn_1D_2D | The 1D/2D connection method (if used) otherwise set to "----" |
| Conn_Width | The connection width of the 1D/2D connection, this is used for determining how many 2D cells to connect to. |
| R1 | Not currently used. |
| R2 | Not currently used. |
| R3 | Not currently used. |
| i_1d_layer | The index to the input layer that has created the manhole. For example an i_1d_nwk value of 4 would be the 4th input layer (1d_nwk_M08_pits_001) below. Read GIS Network == mi\1d_nwk_M04_channels_001.MIF |
| No_Channels | |
| Pit_Connected |