1D Pumps: Difference between revisions

The depth discharge database is set up in the same way as a pit inlet database, see 4.5.1.2 in the TUFLOW manual <font color="majenta"><tt>(Amend this section link once the manual is finalised)</tt></font><tt>.</tt>. Each pump ‘Inlet_type’ must reference a name within the depth discharge database, otherwise [[TUFLOW_Message_1118 | <font color="red"><tt>ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database</tt></font><tt></tt>]] will appear because TUFLOW will use the ‘ID’ field instead of the blank ‘Inlet_type’ field to search the database and it will come up with no information <font color="majenta"><tt>(that seemed to be the case during my testing)</tt></font><tt>.</tt> The ‘Area (m2)’ column is the area of the pump offtake and ‘Width (m)’ is the width of the pump offtake <font color="majenta"><tt>(? Is that true)</tt></font><tt>.</tt> Without information in the Area(m2) or Width(m) columns in the depth discharge database <font color="red"><tt>Error 1092</tt></font><tt></tt> and <font color="red"><tt>Error 1093</tt></font><tt></tt> will appear. <br>