Difference between revisions of "TUFLOW Message 2231"
Jump to navigation
Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts. |alt_msg=NA |type=CHECK |message_desc=???? |suggestions=???? ...') |
|||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc= | + | |message_desc=When using <font color="green"><tt>Read GIS Z HX Line</tt></font> points with type '''ZP''' are snapped along the '''HX''' line to set the elevation of the 2D cells along 1D/2D connection. For the '''ZP''' points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a '''HX''' line has been found without any attached '''ZP''' points. This line is not modifying any cell elevations. |
| − | |suggestions= | + | |suggestions=Check '''HX''' line to see if a breakline is intended. |
|discussion_page=* [[Talk:TUFLOW Message 2231|Discuss Message 2231]] | |discussion_page=* [[Talk:TUFLOW Message 2231|Discuss Message 2231]] | ||
|link3='' | |link3='' | ||
Revision as of 08:03, 22 February 2011
TUFLOW Message
CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts.
Alternate Message
NA
Message Type
CHECK
Description
When using Read GIS Z HX Line points with type ZP are snapped along the HX line to set the elevation of the 2D cells along 1D/2D connection. For the ZP points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a HX line has been found without any attached ZP points. This line is not modifying any cell elevations.
Suggestions
Check HX line to see if a breakline is intended.
| Up |
|---|
 2xxx Messages
|